The iw62TS is a high performance in-wall subwoofer. Designed to augment the low frequency output of an in wall system installation. It uses the same construction and mechanical installation method to ensure it is a perfect match, both acoustically and visually, to the full range units.
With a continuous power output rated at 200W RMS, this in-wall subwoofer is capable of delivering impressive results in large residential and commercial applications; such as small entertainment venues, restaurants, bars, public buildings, board rooms, AV installations and business music systems. The iw62 TS is unique in that it can operate in either passive or active mode, selectable by a switch on the front baffle. In active mode an external controller can be used to manage low frequency extension, the application of equalisation and allowing the crossover point to be tailored to the rest of the system and room. Additionally the iw62 TS will operate in stereo or mono mode; easily converted by means of link wires on the circuit board.
The driver and passive frequency dividing network are mounted in an injection moulded, paintable front baffle manufactured from UV/weather resistant UL94V-0 ABS material.
The excellent structural integrity, when combined with the secure polycarbonate, self-aligning eight clamp mounting system, ensures a performance enhancing rigid acoustic coupling with the wall surface. This provides an immensely stable platform for the drivers to deliver optimum performance.
Robust, gold plated spring loaded terminals enable rapid connection with optimum input signal integrity. Complementing any style of decor, the perforated metal grille and discreet moulded baffle can be painted to blend seamlessly with any install environment.
A steel back can is available as an optional accessory.
| iw62 TS |
| PERFORMANCE |
| System Type | In-wall subwoofer |
| Frequency Response - 6dB | 29Hz-110Hz passive (determined by controller in active mode) |
| Low Frequency Alignment - 6dB | 29Hz passive (determined by controller in active mode) |
| Recommended Amplifier Power | 100 - 400W |
| Power Handling | Average: 200W
Programme: 400W
Peak: 800W |
| Sensitivity 2.83 Volts @ 1 metre | Half Space: 94dB |
| Maximum SPL@ 1 metre | Average: 117dB
Peak: 123dB |
| Impedance | Stereo: 8 Ohms
Mono: 4 Ohms |
| DRIVE UNIT |
| Driver Complement | 2 x 165mm (6.50" ) drive units with long throw multi fibre paper pulp cones |
| CROSSOVER |
| Crossover Passive | 110Hz |
| Active | determined by controller |
| CONSTRUCTION |
| Finish | White - paintable |
| Connectors | Gold plated spring terminals |
| Dimensions (H x W) | Front Baffle: 473.50 x 227mm
(18.68 x 8.94")
Mounting Panel Thickness: 25mm Maximum |
| Cut-out Dimensions (H x W) | 426.1 x 187.6mm
(16.78 x 7.39") |
| Rec. in-wall Mounting Volume | 30 litres
(1.1 cu.ft.) |
| Mounting Depth | 95.50mm
(3.76") |
| Weight (each) | 6.5kg
(16.3lbs) |
| | |
| Accessories | Pre-installation ring
Back can |
